The game hasn't arrived yet, but the console came in this morning. It's...
The Sharp Twin Famicom. I was supposed to get one of these a few years ago from a local seller, but I lost contact with said seller and missed out on the console (and later got a bundle which included a complete-in-box AV Famicom and Super Famicom Jr.). Now, I have one, and I like it a lot despite the fact it's not in 100% working order. It plays Famicom cartridges just fine, but as expected, the drive belt on the Disk System drive turned to mush. It appears the belt glued itself to the PCB in the disk drive and snapped. To top it off, it's glued onto the motor and the gear used to turn the disks. Time for a new drive belt.
The system was $70, but with shipping costing $75, it kinda ruined the price as it totals $145.
Now, I need to clean the system inside and out and get a new belt for the disk drive.
Word of note for those of you who get a Twin Famicom without its DC 7.6V 1.25A power supply, you can use a PSone power supply with an adapter plug. The voltage is just a touch lower at 7.5V, but it's got a higher current rating at 2A and has the same polarity as the Twin Famicom (center positive). The only problem is the tip, which is too small to fit into the Twin Famicom's power supply input, hence the need for an adapter plug.
I will now purchase a Famicom game, and I will give you a hint about it: the game has a sound chip embedded in it.