TG16 Composite mod

[havok666]

I know this is a SEGA forum but I figured someone here might have some knowledge about this mod.

My RF died on my TG16 and I'm trying to do a composite video (RCA) jack mod to it.

I've tapped into the TG16 expansion bus, I can get the L and R audio working fine but I am having problems getting a video signal displayed. I've tried placing 0.1uF and 0.01 uF capacitors between the signal but the picture still comes out unclear and wavy. Anyone have any experience/suggestions?

[Afcs46]

If you don't have a TV with RGB scart you just need to grab the composite video from the pin 22 on the EXP bus.

For more information go http://www.gamesx.com/rgbadd/rgbturbo.htm

[ooXxXoo]

Yes, there is no need to add any capacitor, just connect directly from the composite video pin of the expansion bus and add the proper ground to the Rca connector output or AV cable....That's it...Simple as that...Make sure to not confuse it with the Csync pin...

[havok666]

Alright, I got it all working. Thanks a lot Afcs46 and ooXxXoo.